The HA-1068 Ductilometer features 洪堡's Elite Series Controller. This touch-screen controller provides you with full, graphical monitoring of all testing functions in a stand-alone application, while also providing the ability to control the machine from a networked computer or just port data from the controller to a networked computer.
The HA-1068 Controller provides precise speed control of the DC, stepper motor maintaining constant speed, 完全无振动, 5 ~ 100mm/min. The unit provides for three test briquettes per testing sequence with a maximum carriage travel (elongation) of 150cm and an automatic stop feature. The machine also provides a manual disengage lever for quickly disengaging the screw drive to return the testing carriage back to the start position after a test completion. This feature allows multiple tests to be run without having to wait for the machine to reset itself.
The HA-1068 has a stainless steel interior with an overflow connection, and a baked enamel stainless steel-wrapped exterior. Gears are bronze or brass; all other parts are solid brass to prevent rusting. Finned stainless steel tubes beneath a false bottom provide efficient thermal transfer. A single stainless steel lead screw mounted above water level prevents agitation of water and premature rupture of specimens. A traveling pointer adjusts to zero starting position and indicates exact position of carriage on a linear centimeter scale attached to trough‘s front edge.
In stand-alone mode the controller provides you with full, graphical monitoring of all testing functions, while maintaining full computer control when desired. 7英寸的, waterproof screen provides at-a-glance monitoring of testing functions, in a real-time graphical display, without the use of a computer, building upon 洪堡's dedication to modular, 独立数据采集.
You will be able to run tests and display results while viewing tabulation, basic x-y graphs and instrument readings in real-time during the test, 使用用户定义的, 基础数据采集. Test data is stored in the device and can be down-loaded to a USB drive via the machine's FRONT USB port or the data can be transferred to a computer via the LAN port.
A second USB port located on the back of the machine can also be used to power a wireless access point, which can provide a wireless hook-up with a computer, 如果没有可用的局域网.
The HA-1068 Ductilometer is sold without a circulating temperature controller. If desired, choose a circulating temperature controller with the correct AC requirements. The temperature-controller provides a solid-state, thermostatically controlled bath and circulator to maintain water temperature within a ±0.9°F (±0.5°C).
温度范围为:
-10°C to 80°C and the heating capacity is 1000W with a 0.1°C稳定性. 包括一个6'(183厘米)线, feed-through switch and 3-prong plug and 3 standard H-1080 briquette molds with H-1090 plates. Trough overall dimensions: 11.75" x 74" x 6.375"高(30 x 188 x 16厘米). Acrylic Cover is included with this machine.
或使用
问洪堡
